Window protection grille for MB Vito from 2014 onwards - right sliding door
The window protection grille for the right sliding door on the Mercedes Vito from model year 2014 (type W447) serves to prevent break-ins and protect against mechanical damage from inside and outside.
Suitable for the following vehicle sizes and models:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Cargo area height |
| L1H1 |
Wing doors |
3,200 mm |
4,900 mm |
1,910 mm |
1,391 mm |
| L1H1 |
Tailgate |
3,200 mm |
4,900 mm |
1,910 mm |
1,391 mm |
| L2H1 |
Swing doors |
3,200 mm XL |
5,140 mm |
1,910 mm |
1,391 mm |
| L2H1 |
Tailgate |
3,200 mm XL |
5,140 mm |
1,910 mm |
1,391 mm |
| L3H1 |
Swing doors |
3,430 mm |
5,370 mm |
1,910 mm |
1,391 mm |
| L3H1 |
Tailgate |
3,430 mm |
5,370 mm |
1,910 mm |
1,391 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
A sturdy steel tube grille made of black powder-coated perforated steel sheet protects your sliding door window from glass breakage and theft.
For burglary prevention and protection against mechanical damage from inside and outside.
The driver's view remains unobstructed thanks to the 25x35 mm mesh openings, while the view from outside is severely restricted. Foam rubber
is attached to the edges to protect the paintwork from scratches and prevent vibrations in the vehicle interior.
The scope of delivery includes a window protection grille and the mounting material.
Note: The window protection grille is only suitable for vehicles with roof height H1. Not for vehicles with high roof H2!
Installation of the window protection grille for Mercedes Benz Vito
The window protection grille for the MB Vito is manufactured to fit the right-hand sliding door ex-works.
The mounting points on the window protection grille must be bent at the perforated points to match the door frame.
Don't worry, bending them is child's play.
Before installation, the points for the drill holes must be marked. Then drill the holes in the door frame.
The felt strip supplied is stuck to the bent surfaces. This prevents noise transmission and vibrations in the vehicle interior.
Please clean the windows before finally installing the window grilles.
As a final step, screw the window protection grille in place using the screws supplied.
Features of the window protection
grilles - Steel, black
powder-coated - Protection against break-ins and theft
- Large grid for good rear visibility
- Protects the windows from slipping loads
- Quick and easy installation thanks to predefined
mounting points - Available for sliding doors, rear doors, and
tailgates - Custom-made for every delivery van
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
