Black roof rack foot for airline rails - 65 mm - 90 degrees

Black roof rack foot for airline rails - 65 mm - 90 degrees

SKU: 102219
Category: Airline rail accessories

Black stainless steel base with a 90-degree angle and a height of 65 mm

29,90 €

incl. 19% VAT , plus

28 In stock
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description

Black stainless steel roof rack foot - 65 mm high

The black stainless steel base can be attached to airline rails on the vehicle roof with screw fittings or lashing rail nuts.

The base can be combined with system profiles or our crossbars for mounting on the vehicle roof. This makes it possible to design a roof

rack according to your own requirements. The roof rack base has an angle of 90 degrees and is suitable for many roof shapes with a straight roof line, such as the VW T5, T6, and VW T6.1. Of course, it can also be used for all other vehicles with a straight roof line, such as the Fiat Ducato, Citroen Jumper, etc.

The base is made of stainless steel. The holes are drilled at intervals of 75 mm, making them ideal for mounting on airline rails.

The height from the top edge of the airline rail to the top edge of the roof foot is 65 mm. The roof feet can

be attached in combination with two airline rails and V2A screw fittings or M8 lashing rail nuts and stainless steel screws.
Our crossbars are mounted on the roof rack feet with two slotted nuts.

To create a cross connection between the airline rails, the roof rack feet, and our crossbar, you will need the following components:

- 1x crossbar (length as required)
- 2x T-slot nuts 2xM6 -
102335 - 4x M8 lashing rail nuts + stainless steel screws or 4x V2A screw
fittings - 2x roof rack feet One roof foot is

included in the scope of delivery. To connect to the other side of the roof, you will need two roof feet!

Length - Phillips screw:	34x34 mm
Width - Phillips screw:	8.9 mm
Bottom contact surface:	120x30 mm
Material:	V2A stainless steel
Material thickness:	3 mm
Height:	65 mm
Angle:	90 degrees
Color:	Black powder-coated with fine texture

In the following video, you will find a non-binding installation example for the construction of a homemade roof rack made of airline rails, roof rack feet, and crossbars: