Aluminum crossbar for roof rack construction with two grooves
We offer aluminum crossbars in a length of 148 cm. Objects can
be attached to the crossbar using the grooves above and behind it.
The crossbar is aerodynamically shaped in the direction of travel. This makes it quieter than the commonly used Bosch system profiles.
The crossbars are ideal for DIY projects with our roof rack stainless steel feet.
With the asymmetrical foot (item no.: 102078, 102085, 102055, 102056), the crossbars can be combined with airline rails.
The 1,480 mm long crossbar can be used with our asymmetrical foot for a track width (center-to-center airline rail) of 1,250 - 1,420 mm.
Our roof rack feet: Item no.: 102092, 102097, 102104, 102106, 102107, 102080-S, 102081-S, 102000, 102219, 102101,
are suitable for a track width (center-to-center airline rail) of 1,150 - 1,420 mm.The track width is measured from center to center of the airline rail! Included
in delivery are: two plastic end caps, four M6 screws, and rubber plugs to close the grooves.
The roof rack feet can be secured per crossbar with four M6 airline rail groove nuts.
Each foot can be attached to the airline rail using two M8 lashing rail nuts with stainless steel screws or two V2A screw fittings.
Summary: To attach a crossbar to airline rails, you will need the following items:
1. 1x crossbar
2. 4x T-slot nuts 2xM6 -
1023353. 4x
M8 lashing rail nuts +
stainless steel screws or 4x
V2A screw fittings4. 2x roof rack feet
If you have any questions about this complex construction, please do not hesitate to contact us.
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
