Crossbar for DIY roof rack with airline rails - 118 cm

Crossbar for DIY roof rack with airline rails - 118 cm

SKU: 114031
Category: Roof rack feet and brackets

Short aluminum roof crossbar for airline rails

74,90 €

incl. 19% VAT , plus

5 In stock
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description

Short aluminum crossbar for roof rack construction with two grooves

We offer the aluminum crossbar in a length of 118 cm.

Objects can be attached to the crossbar using the existing grooves above and behind it.
The crossbar is aerodynamically shaped in the direction of travel. This makes it quieter than the commonly used Bosch system profiles.

The crossbars are ideal for DIY use with our roof rack stainless steel feet.

With the asymmetrical foot (item no.: 102078, 102085, 102055, 102056), the crossbars can be combined with airline rails.
The 1,180 mm long crossbar can be used with our asymmetrical foot for a track width (center-to-center airline rail) of 950 - 1,120 mm.

Our roof rack feet: Item no.: 102092, 102097, 102104, 102106, 102107, 102080-S, 102081-S, 102000, 102219, 102101, are suitable for a track width (center-to-center airline rail) of 850 - 1,120 mm.

The track width is measured from center to center of the airline rail! Included

in delivery are: two plastic end caps, four M6 screws, and rubber plugs to close the slots.

The roof rack feet can be secured per crossbar with four M6 airline rail slot nuts.

Each foot can be attached to the airline rail using two M8 lashing rail nuts with stainless steel screws or two V2A screw fittings.

Summary: To attach a crossbar to airline rails, you will need the following items:

1. 1x crossbar
2. 4x T-slot nuts 2xM6 - 102335
3. 4x M8 lashing rail nuts + stainless steel screws or 4x V2A screw fittings
4. 2x roof rack feet

If you have any questions about this complex construction, please do not hesitate to contact us.