2x semi-circular airline rails, light - 2 meters - 4x end caps
The two 2-meter-long airline rails with a semicircular profile made of aluminum are ideal for surface mounting on vehicle walls.
The airline rails are also often glued into the rear garages of motorhomes or into trailers with sandwich panels. The two grooves on the underside facilitate the adhesion of the adhesive.
The airline rail is undrilled and can therefore be glued or drilled individually for the respective application.
Light rails are fastened with M5 countersunk screws at most.
The scope of delivery includes two 2-meter-long airline rails with four matching end caps.
Technical characteristics
| Length: |
2.0 meters (1,998 mm) |
| Rail width: |
42 mm |
| Installation height: |
10 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Material: |
Aluminum - bare |
| Alloy: |
EN AW 6082 T6 |
| Weight: |
0.53 kg/m |
| Mounting hole: |
Undrilled |
| Made in |
Germany |
| Manufacturer: |
allsafe |
Load capacities of the semi-circular airline rail - Light
The airline lashing rail can be used in conjunction with the Single Stud, Automotive, and Double Stud fittings in accordance with DIN 75410, ISO 27955, and ISO 27956.
With the Quattro Stud fitting, the airline rail can even be used in accordance with DIN EN 12640 up to 1000 daN.
Airline rails are used in conjunction with locking bars, lashing straps, or end fittings for load securing.
The following load capacities are achieved with the following fittings:
| End fitting/fitting |
Standard |
Load capacity |
| Single stud fitting - Item no.: 102033 |
ISO 27956 |
300 daN |
|
ISO 27955 |
350 daN |
| Kerl 500 - Item no.: 102211 |
DIN 75410-1 / ISO 27956 |
400 daN |
|
ISO 27955
|
350 daN |
| Double Stud/Double End Fitting - Item No.: 102036 |
DIN 75410-1 |
400 daN |
|
ISO 27956 |
500 daN |
| Quattro Stud Fitting - Item no.: 102176 |
ISO 27956 |
800 daN |
|
EN 12640
|
800 daN |
The above permissible load capacities are achieved under the following conditions:
It is essential that the airline track is securely fastened to the substrate!
The maximum load capacity of the airline track depends on the following factors:
Not only the strength, material properties and, depending on the fastening, the surface is also decisive for the load capacity; the type of fitting used is also of great importance.
If the airline rail is to be screwed in place, we strongly recommend that you follow the installation guidelines provided by the manufacturer allsafe.
These state that
countersunk screws must be placed at a distance of 75 mm for airline rails with a metric grid of 25 mm!
Screws with a strength of at least 10.9 must be used, with washers and self-locking nuts! Since the use of nuts and washers is often not possible in vehicle construction, rivet nuts or threaded anchor nuts are used as an alternative.
The installer of the load securing equipment is responsible for the installation and the resulting possible load!
Application of DIN and ISO standards:
- ISO 29755 = lashing point standard in passenger
cars - ISO 29756 = lashing point standard
in panel vans (transporters) - DIN 75410-1 = lashing point standard on flatbed vehicles up to 3.5 t
- EN 12640 = lashing point standard on flatbed vehicles from 3.5 t
Attaching the airline rail
The airline rail as a light profile is usually fastened with M5 countersunk screws.
Another fastening option is gluing.
This airline rail is not pre-drilled and can therefore be glued, e.g., with Sikaflex 554, or drilled at the desired points.
We only recommend riveting or fastening with other head screws to a limited extent, as the protruding rivet head or screw head makes it impossible to insert the end fittings or push through the slot nuts.
The installer of the load securing aids is responsible for the installation and the resulting possible load!
Where does this airline track come from?
This airline rail is manufactured by the company allsafe in Germany.
This is expressly not a Chinese import!
The advantages of the semi-circular airline rail Light
- only
42 mm wide - groove for adhesive (ideal for rear garages in motorhomes)
- low weight due to
aluminum - high
tensile strength - versatile applications (not only for load securing)
allsafe GmbH & Co. KG
Gerwigstraße 31
78234 Engen
sales@allsafe-group.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
