2x semi-circular airline rail - 1 meter - light + 4x end cap

2x semi-circular airline rail - 1 meter - light + 4x end cap

SKU: 102520624-2-10-E4
Category: Airlineschiene Halbrundprofil Light

2× semi-circular airline rail Light, 1 m long, including 4 end caps. Lightweight aluminum profile (42 mm), ideal for roof crossbars, vans, and motorhomes. Perfect for screw or adhesive mounting thanks to a groove for excess adhesive. Made in Germany.

45,50 €

incl. 19% VAT , plus

43 In stock
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description

This practical set consists of two semi-circular airline rails with a light profile, each 1 meter long, and four matching end caps. The lightweight aluminum construction is ideal for vans, motorhomes, box bodies, and custom vehicle conversions. This length is particularly common on roof crossbars of vehicles such as the VW Crafter, MAN TGE, or Mercedes Sprinter, where it serves as a counterpart to floor-mounted airline rails.

2× semi-circular Light airline rail – 1 meter including 4 end caps

The aluminum airline rail Light impresses with its semi-circular profile, which is only 42 mm wide and adapts particularly well to vehicle contours. On the underside, there are adhesive grooves on both sides that absorb excess construction adhesive – ideal for sandwich panels or smooth surfaces in motorhomes and transport vehicles. The four end caps included ensure a secure, clean, and injury-free finish.

Technical properties – Light semi-circular airline rail 1.0 m
Feature	Value
Length	1.0 meter (990 mm ± 3 mm)
Rail width	42
Installation height	10 mm
Hole diameter	20 mm
Grid spacing	25 mm
Material	Aluminum – bare
Alloy	EN AW 6082 T6
Weight	0.53 kg/m
Mounting hole	Undrilled
Made	Germany
Manufacturer	allsafe

The airline rail is compatible with a wide range of airline fittings and meets various standard requirements, depending on the end fitting. This makes it suitable for both professional use and private vehicle conversions.

Max. load capacity of the airline rail Light with the following fittings
Fitting	Standard	Load capacity
Single stud – Item 102033	ISO 27956	300 daN
	ISO 27955	350 daN
Kerl 500 – Item 102211	DIN 75410-1 / ISO 27956	400 daN
	ISO 27955	350 daN
Double Stud – Item 102036	DIN 75410-1	400 daN
	ISO 27956	500 daN
Quattro Stud – Item 102353	ISO 27956	800 daN
	EN 12640	800 daN

To achieve the above values, professional installation is essential. The substrate material, screw strength, adhesive surface, and the fitting used have a significant influence on the maximum load capacity.

Recommendations for installation

For screw fastening, M5 countersunk screws (strength at least 10.9) are recommended, mounted at a distance of approx. 75 mm. Alternatively, the rail can be permanently bonded with construction adhesive such as Sikaflex 554. The use of rivets or screws with protruding heads is not recommended, as this prevents fittings and slotted nuts from being fully inserted into the rail.

Relevant standards for the use of airline rails

ISO 27955 – Lashing point standard in passenger cars
ISO 27956 – Lashing point standard in panel vans/transporters
DIN 75410-1 – Lashing point standard on flatbed vehicles up to 3.5 t
EN 12640 – Lashing point standard for commercial vehicles over 3.5 t

Origin & quality
The airline rails of the Light profile are manufactured by allsafe in Germany. They are characterized by high material quality, tight manufacturing tolerances, and reliable strength – not an imported product, but brand quality Made in Germany.

Advantages of the set at a glance