2x Slim semi-circular profile airline rail - 3 meters with 4x end caps
The two airline rails with a semi-circular profile are particularly suitable for mounting on vehicle walls or floors.
With a length of approx. 3.0 meters, these two lashing rails can be used, for example, in closed trailers or in transporters at the top and bottom of the side walls opposite the sliding door, with the appropriate airline accessories for securing vehicle equipment or for securing loads with locking bars or lashing straps.
The 40 mm narrow airline rail is pre-drilled with M5 countersunk holes every 100 mm.
This airline rail is suitable for securing light objects. This airline rail is NOT suitable for high tensile loads, such as the transport of motorcycles or pallets!
The scope of delivery includes two airline rails with a length of 3.0 meters and four matching end caps.
Technical characteristics
| Length: |
3.0 meters (2,990 mm +/- 3 mm) |
| Rail width: |
40 mm |
| Installation height: |
9.5 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Material: |
Aluminum - bare |
| Weight: |
0.53 kg/m |
| Drilling distance: |
100 mm |
| Countersink hole: |
M5 |
| Made in: |
EU |
Load capacities of the semi-circular airline rail - Slim
If a double stud fitting or double end fitting is used, increased tensile strength can be assumed.
The values in the table below are the tensile strengths specified by the manufacturer.
LC Strength
| Fitting/end fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN* |
500 daN* |
| X-Z 45° |
500 daN* |
500 daN* |
| Y-Z 45° |
400 daN* |
400 daN* |
(Manufacturer's specifications*)
Fastening the airline rail
The slim-profile airline rail is usually fastened with M5 countersunk screws.
If the airline rail is to be screwed in place, we strongly recommend that you follow the manufacturer's installation guidelines.
These state that screws with a minimum
strength of 10.9 must be used, with washers and self-locking nuts! Since it is often not possible to use nuts and washers in vehicle construction, rivet nuts or threaded anchor nuts are used as an alternative. We only recommend
riveting or fastening with other head screws to a limited extent, as the protruding rivet head or screw head makes it impossible to insert the end fittings or push through the slotted nuts.
Another or additional fastening option is gluing. The installer of the load securing
aids is responsible for the installation and the resulting possible load!
Where does this airline track come from?
This airline rail is manufactured by a German manufacturer in the EU.
This is expressly not a Chinese import!
The advantages of the airline rail summarized
- only 40 mm wide semicircular
profile - fits on the crossbars of most transporters
- low weight due to
aluminum - versatile applications (not ONLY for load securing)
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
