Black roof rack foot for stainless steel airline rails - 100 mm height

Black roof rack foot for stainless steel airline rails - 100 mm height

SKU: 102101
Category: Airlineschienen-Zubehör

100 mm high black stainless steel base at a 90-degree angle

29,90 €

incl. 19% VAT , plus

13 In stock
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description

Black stainless steel roof rack foot - 100 mm high

The black powder-coated stainless steel foot can be attached to airline rails on the roof with screw fittings.

The foot can be combined with system profiles or our crossbars for mounting on the vehicle roof. This makes it possible to design a roof rack according to your own requirements.

The roof rack base has an angle of 90 degrees and is suitable for many roof shapes with a straight roof line, such as the VW T5, T6, and VW T6.1. Of course, it is also suitable for all other vehicles with a straight roof line, such as the Fiat Ducato, Citroen Jumper, etc.

The roof rack base is made of stainless steel. The holes are drilled at intervals of 75 mm, making them ideal for mounting on airline rails.

The base has an angle of 90 degrees and, due to its height of 100 mm, is suitable for high roof structures. The angle
is interesting for motorhomes with a roof hatch. In most cases, this can be built over with this angle and can be quickly removed.

The roof feet can be attached in combination with two airline rails and V2A screw fittings or M8 lashing rail nuts and stainless steel screws.
Our crossbars are mounted on the roof rack feet with two slotted nuts.

To create a cross connection between the airline rails, the roof rack feet, and our crossbar, you will need the following components:

- 1x crossbar (length as required)
- 2x T-slot nuts 2xM6 -
102335 - 4x M8 lashing rail nuts + stainless steel screws or 4x V2A screw
fittings - 2x roof rack feet One roof foot is

included in the scope of delivery. To connect to the other side of the roof, you will need two roof feet!

Length - Phillips screw:	34x34 mm
Width - Phillips screw:	8.9 mm
Bottom contact surface:	120x30 mm
Material:	V2A stainless steel
Material thickness:	3 mm
Height:	100 mm
Angle:	90 degrees
Surface:	Black powder-coated with fine texture

In the following video, you will find a non-binding installation example for the construction of a homemade roof rack made of airline rails, roof rack feet, and crossbars: