The 0.5-meter-long semi-circular airline rail is the most compact version of this lashing rail series and is ideal for particularly narrow or difficult-to-access mounting areas in vehicles. Thanks to the factory-drilled holes in a 10-cm grid, it can be mounted immediately without any additional processing steps. The matching S6 holes are designed for M6 countersunk head screws, enabling flush, stable, and low-vibration fastening.
Semi-circular airline rail for load securing – 0.5 meters
Despite its short length, this short airline rail offers maximum flexibility. It is perfect for door areas, small side surfaces, additional lashing points in the rear, wheel arch areas, or modular installation systems. Both horizontal and vertical installation is possible without any problems, making the rail versatile for use in vans, box trucks, trailers, campervans, or mobile workshop systems.
This rail length is also compatible with all standard airline fittings. These include single-stud and double-stud fittings, airline locking bars, and various special fittings. The optionally available end caps 102521499 and 102071 protect the ends of the rail and ensure a clean, professional look.
Technical properties
| Feature |
Value |
| Length |
0.5 meters (490 mm ± 3 mm) |
| Rail width |
50 mm |
| Installation height |
11.5 mm |
| Hole diameter |
20 mm |
| Hole/grid spacing |
25 mm |
| Material |
Aluminum – bare |
| Weight |
0.76 kg/m |
| Mounting hole |
S6 for M6 countersunk screw |
| Drilling distance |
100 mm |
| Made |
EU |
The technical specifications show that the compact 0.5-meter rail is perfectly suited for demanding load securing tasks despite its short length. The aluminum construction offers high stability and can withstand dynamic forces that can occur during daily driving. However, the combination of rail and matching fittings is particularly important. These determine how much force can be effectively transferred depending on the angle.
LC strength of the fittings
| Fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
As with any airline rail, the actual load capacity depends not only on the product itself, but also on the quality of the substrate. Material thickness, construction, load capacity, and the type of screw or adhesive connection have a significant influence on the safety values that can be achieved later. Therefore, the manufacturer's installation guidelines should be strictly observed, as the installer is responsible for proper installation and load capacity.
FAQs about the 0.5-meter airline rail
For which areas is the 0.5-meter airline rail particularly suitable?
This short airline rail is ideal for narrow areas such as side panels, rear modules, furniture edges in campers, or additional fixing points in the loading floor.
Can the 0.5-meter rail be installed immediately?
Yes. It is pre-drilled in 10 cm increments and designed for M6 countersunk screws, so it can be installed immediately without any further processing.
Which fittings is this length compatible with?
The rail is compatible with single-stud fittings, double-stud fittings, airline locking bars, and various special fittings.
Is it possible to combine screwing and gluing?
Yes. Depending on the substrate, a mixed fastening method may be advisable. However, the achievable holding force depends heavily on the material thickness and structure.
Do end caps make sense for the 0.5 m version?
End caps are optional, but they protect the ends, prevent sharp edges, and improve the appearance in areas of frequent contact in the loading area.
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
