Aluminum airline lashing plate
This small rectangular lashing plate with the profile of an airline rail is suitable for retrofitting in vehicles.
Where a full airline rail is not required, e.g. for securing a cool box or tool box, this lashing plate is an ideal addition.
It can also be used to secure larger loads, as it has a maximum tensile load of 400 daN, depending on the lashing strap, fitting used, and mounting point.
All airline fittings with double-end fittings (double-stud fittings), single-end fittings (single-stud fittings) and automotive fittings (plastic fittings), or tension belts with pre-sewn airline fittings can be attached to the lashing plate.
The openings on both sides are rounded, have no protruding edges, and reduce injury or damage to the load, especially when mounted on the floor.
Fastening the airline lashing plate
The lashing plate can be mounted on the vehicle floor, on the vehicle walls, and even on the ceiling.
It is important to ensure that sufficient force is applied to the substructure.
If these requirements are met, the lashing plate can withstand the specified tensile load of up to 400 daN.
The lashing plate is fastened with two M6 countersunk screws. The countersunk holes are already milled into the bottom of the plate.
We recommend screws with a strength of at least 10.9. The length of the screws is selected according to the mounting point.
Technical data:
| Material: |
Aluminum |
| Hole diameter: |
20 mm |
| Load capacity LC: |
400 daN |
| Total length: |
76 mm |
| Total width: |
34 mm |
| Installation height: |
12.5 mm |
|
| Fastening: |
2xM6 countersunk screw |
Features of the Airlinelashing plate - For installation locations with limited space
- For single
and double stud fittings -
Made of aluminum - For walls, ceilings, or
floors - Load capacity up to 400 daN
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
