Iveco Daily Transporter floor

The birch plywood transporter floor for the Iveco Daily is precisely tailored and cut to size for the respective vehicle size.
The floor panels for the Iveco Daily are available for all wheelbases.
In combination with a cargo area lining and wheel arch lining, this provides optimum protection for the cargo area.

Features of the Iveco Daily screen-printed floor panels

We can offer the floor panels in different colors, finishes, and surfaces.
They are available in gray, brown, granite finish, or as a slip-resistant version with a sturdy rubber-plastic coating in gray or black.
The transporter floor itself is made of phenolic resin-coated birch plywood in thicknesses of 9 or 12 mm, cut to size using a CNC milling machine.

The 9 mm thick screen-printed panel is suitable for normal transport, such as the transport of light pallets or general cargo.
The 12 mm thick transporter floor is designed for heavy-duty use, such as the transport of heavy pallets, the installation of vehicle equipment, or the insertion of airline rails.
The floor panels are supplied in one piece, as in the Citroen Berlingo, or in several pieces, as in the Citroen Jumper and Citroen Jumpy. This has proven to be an advantage, as it makes installation much easier and significantly reduces the risk of damage to the vehicle during assembly.

Depending on the vehicle, aluminum strips are milled into the surface of the floor panel at the sliding doors or rear doors.
The original lashing eyes in the floor area are replaced by lashing recesses. These are also milled into the surface without any annoying edges.
They are attached by screwing the lashing eye into the lashing recess.
In vehicles without lashing eyes in the floor, the floor panel is closed and must be glued, riveted, or screwed in place.

Transporter floor with airline rails for Iveco Daily

Our 12 mm thick floor panels can be extended with pre-milled and glued airline rails.
Normally, airline rails are embedded parallel to the crossbars in the roof so that, in combination with locking bars, vertical load securing can be achieved.
This is often required when transporting windows, screen printing plates, or wooden panels.
On special request, we can mill the airline rails into almost any position.

Vehicle equipment and transporter floors

When installing vehicle equipment in Iveco commercial vehicles, the stronger 12 mm floor is advantageous, as the load is concentrated in specific areas.
The tensile strength of recessed threaded sleeves for fastening the modules is significantly higher with 12 mm thick floor panels.

Our transporter floors are made of wear-resistant and durable material. The underside of the floor panel is smooth and the top side has a screen-printed pattern.
A special feature is the anti-slip transporter floor, which is coated with a slip-resistant surface on the top side. Choose the vehicle floor that suits you best from a wide range of different coatings, colors, and thicknesses.