Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
Ford Transporter floor
The transporter floor made of 9 or 12 mm thick birch plywood for Ford transporters is contour-milled and cut to size to fit the respective vehicle.
The floor panels are available for the Ford Transit, Ford Transit Custom, and Ford Transit Connect and all wheelbases.
In combination with cargo area paneling and wheel arch paneling, this provides optimum protection for the cargo area.
- Thickness: 9 or 12 mm
- Color: brown, gray, granite, gray anti-slip, black anti-slip
- Suitable for Ford Connect
wheelbase - L1 with 2,755 mm from model year 2023
- Suitable for Ford Connect III
wheelbase - L2 with 2,970 mm from model year 2022
- Total vehicle length: 5,531
mm - Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
- for model years 2013 - 2023
- for 2nd generation vehicles built from 2024 onwards
- for 2nd generation vehicles built from 2024 onwards
- Total vehicle length: 5
,980 mm - Thickness: 9 or 12 mm
- Color: brown, gray, granite, gray anti-slip, black anti-slip
- Total vehicle length: 6,704 mm
- Thickness: 9 or 12 mm
- Color: brown, gray, granite, gray anti-slip, black anti-slip
Features of Ford screen-printed floor panels
We can offer floor panels for Ford commercial vehicles in various colors, finishes, and surfaces.
They are available in gray, brown, granite finish, or as a slip-resistant version with a sturdy rubber-plastic coating.
The transporter floor itself is made from a phenolic resin-coated birch plywood panel, in thicknesses of 9 or 12 mm, cut to size using a CNC milling machine.
The 9 mm thick screen-printed panel is suitable for normal transport, such as the transport of light pallets or general cargo.
The 12 mm thick transporter floor is designed for heavy-duty use, such as the transport of heavy pallets, the installation of vehicle equipment, or the insertion of airline rails.
The floor panels are supplied in one piece, as in the Ford Connect with a short wheelbase and a sliding door, or in several pieces, as in the Ford Transit and Ford Custom. This has proven to be an advantage, as it makes installation much easier and significantly reduces the risk of damage to the vehicle during assembly.
Depending on the vehicle, aluminum strips are milled into the surface of the floor panel at the sliding doors or rear doors.
The original lashing eyes in the floor area are replaced by lashing recesses. These are also milled into the surface without any protruding edges.
They are secured by screwing the lashing eye into the lashing recess.
For vehicles without lashing eyes in the floor, the floor panel is closed and must be glued, riveted, or screwed in place.
Transporter floor with airline rails for Ford Transporters
Our 12 mm thick floor panels can be extended with pre-milled and glued airline rails.
Normally, airline rails are embedded parallel to the crossbars in the roof so that, in combination with locking bars, vertical load securing can be achieved.
This is often required when transporting windows, screen printing plates, or wooden panels.
On special request, we can mill the airline rails into almost any position.
Vehicle equipment and transporter floors
When installing vehicle equipment in Ford commercial vehicles, the stronger 12 mm floor is advantageous, as the load is concentrated in specific areas.
The tensile strength of embedded threaded sleeves for fastening the modules is significantly higher with 12 mm thick floor panels.
Our transporter floors are made of wear-resistant and durable material. The underside of the floor panel is smooth and the top side is embossed with a screen print.
A special feature is the anti-slip transporter floor, which is coated with a slip-resistant surface on the top side.
Choose the vehicle floor that suits you best from a wide range of different coatings, colors, and thicknesses.