Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
Renault van floor
The transporter floor for Renault panel vans is CNC contour milled to fit your vehicle perfectly.
The floor panels are available for the Renault Master, Renault Trafic, Renault Kangoo, and all wheelbases.
In combination with cargo area paneling and wheel arch paneling, this provides optimal protection for the cargo area.
- Total vehicle length: 5,399 - 5,480 mm
- Thickness: 9 or 12 mm -
Color: brown, gray, granite, gray anti-slip, black anti-slip
- Total vehicle length: 4,999 mm
- Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
- for vehicles built between 2010 and
2023 - Total vehicle length: 5,548
mm - Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
- cargo area length: 1,819 mm
onwards - Total vehicle length: 4,910 mm
- Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
- for vehicles built in 2024 or
later - Total vehicle length: 5
,685 mm - Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
- for vehicles built in 2024 or
later - Total vehicle length: 6,315 mm
- Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
- for model years 2010 to
2023 - short wheelbase - L1 - 3,182 mm
- thickness: 9 or 12 mm -
color: brown, gray, granite, gray anti-slip, black anti-slip
—for vehicles built between 2010 and 2023
—total vehicle length: 6,848 mm
—thickness: 9 or 12 mm
—color: brown, gray, granite, gray anti-slip, black anti-slip
- for model
years 2010 to 2023 - Total vehicle length: 6,198
mm - Thickness:
9 or 12 mm - Color: brown, gray, granite, gray anti-slip, black anti-slip
ex-factory - cargo area length: 1,419 mm
Features of Renault floor panels
We offer floor panels for Renault commercial vehicles in a variety of colors, finishes, and surfaces.
They are available in gray, brown, granite finish, or as a slip-resistant version with a sturdy rubber-plastic coating.
The transporter floor itself is made of phenolic resin-coated birch plywood in thicknesses of 9 or 12 mm, cut to size using a CNC milling machine.
The 9 mm thick screen-printed panel is suitable for normal transport, such as the transport of light pallets or general cargo.
The 12 mm thick transporter floor is designed for heavy-duty use, such as the transport of heavy pallets, the installation of vehicle equipment, or the insertion of airline rails.
The floor panels are supplied in one piece, as in the Renault Kangoo, or in several pieces, as in the Renault Master and Renault Trafic. This has proven to be an advantage, as it makes installation much easier and significantly reduces the risk of damage to the vehicle during assembly.
Depending on the vehicle, aluminum strips are milled into the surface of the floor panel at the sliding doors or rear doors.
The original lashing eyes in the floor area are replaced by lashing recesses. These are also milled into the surface without any protruding edges.
They are attached by screwing the lashing eye into the lashing recess.
For vehicles without lashing eyes in the floor, the floor panel is closed and must be glued, riveted, or screwed in place.
Transporter floor with airline rails for Renault Transporter
Our 12 mm thick floor panels can be extended with pre-milled and glued airline rails.
Normally, airline rails are embedded parallel to the crossbars in the roof so that, in combination with locking bars, vertical load securing can be achieved.
This is often required when transporting windows, screen printing plates, or wooden panels.
On special request, we can mill the airline rails into almost any position.
Vehicle equipment and transporter floors
When installing vehicle equipment in Renault commercial vehicles, the stronger 12 mm floor is advantageous, as the load is concentrated in specific areas.
The tensile strength of recessed threaded sleeves for fastening the modules is significantly higher with 12 mm thick floor panels.
Our transporter floors are made of wear-resistant and durable material. The underside of the floor panel is smooth and the top side is embossed with a screen print.
A special feature is the anti-slip transporter floor, which is coated with a slip-resistant surface on the top side.
Choose the vehicle floor that suits you best from a wide range of different coatings, colors, and thicknesses.