Only while stocks last: This M8 threaded fitting for Airline Rails provides a flexible mounting point for suitable components and accessories on compatible Airline Rail systems. With a clamping range of 0–33 mm and an M8 threaded stud, the fitting is suitable for a wide range of mounting applications in vans, camper vans, trailers and other vehicle conversions.
The fitting is supplied with an M8 threaded stud, wing-shaped retaining plate and self-locking nut. This product is currently being offered as a clearance item at a heavily reduced special price.
Clearance item at a special price
Only a limited quantity remains available. Once the current stock has been sold, this product will no longer be available.
What is the M8 threaded fitting for Airline Rails used for?
In short: The M8 threaded fitting creates a flexible and repositionable mounting point in a compatible Airline Rail. Using the threaded stud, wing-shaped retaining plate and self-locking nut, suitable components or accessories can be mounted within a clamping range of 0–33 mm.
Position an M8 mounting point flexibly along the Airline Rail
The main advantage of a threaded fitting is the combination of flexible positioning and mechanical fastening. Instead of permanently installing a fixed mounting point in one location, the fitting can be inserted at a suitable position along a compatible Airline Rail.
The M8 thread can then be used to secure suitable components. This makes the threaded fitting particularly useful for custom vehicle conversions and mounting solutions where an existing Airline Rail system is used as a flexible base.
Technical specifications of the M8 threaded fitting
Technical specifications and compatibility
| Feature |
Specification |
| Thread |
M8 |
| Clamping range |
0–33 mm |
| Hole spacing |
25 mm / 25.4 mm |
| Compatible rails |
Compatible standard, trapezoidal, floor, XXS, Slim and selected Light Airline Rail profiles – see compatibility list below |
| Not suitable for |
Half-round Light Airline Rails and flat profiles |
| Included |
Threaded stud, wing-shaped retaining plate, self-locking nut |
Which Airline Rails are compatible with the threaded fitting?
The M8 threaded fitting is designed for compatible Airline Rails with 25 mm or 25.4 mm hole spacing. Our practical testing has shown that the fitting is compatible with more rail profiles than initially expected.
Important compatibility information:
Due to the reinforced base of the fitting, this model is not suitable for half-round Light Airline Rails or flat-profile Airline Rails. Please check which rail profile is installed before ordering.
We have tested the threaded fitting with the following Airline Rails from our range:
The hole spacing alone is therefore not sufficient to determine compatibility with this fitting. The rail geometry and available internal clearance must also be suitable for the threaded fitting.
What does a clamping range of 0–33 mm mean?
The specified clamping range of 0–33 mm describes the range that can be used for mounting with the supplied combination of threaded stud, wing-shaped retaining plate and nut.
Before installation, it is therefore important to check more than just compatibility with the Airline Rail. The dimensions and design of the component being mounted must also be suitable for the threaded connection and available clamping range.
Threaded fitting or ring fitting – what is the difference?
A conventional Airline Rail fitting with a ring or eye is primarily designed to create an attachment point for suitable load securing equipment such as a lashing strap. An M8 threaded fitting serves a different purpose: it provides a threaded mounting point within the Airline Rail system.
This makes the M8 threaded fitting particularly useful when suitable accessories or other components need to be mounted directly to the Airline Rail and a removable or repositionable connection is required.
Before installation: check the rail and fitting
Practical tip: Before inserting the fitting, check both the Airline Rail and threaded fitting for damage and contamination. The fitting must be fully and correctly seated in the intended location within the rail.
When mounting components, remember that the load capacity of the complete installation does not depend on the threaded fitting alone. Important factors include the Airline Rail itself, how the rail is attached to the supporting structure, the component being mounted and the direction of the applied load.
M8 threaded fitting for Airline Rails at a clearance price
If you use one of the compatible Airline Rail profiles listed above and require a flexible M8 mounting point, this threaded fitting provides a practical solution complete with wing-shaped retaining plate and self-locking nut.
The M8 threaded fitting with a 0–33 mm clamping range is currently available at a heavily reduced clearance price.
Once they're gone, they're gone: The special price applies only to the remaining stock. Once the current inventory has been sold, this product will no longer be available.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
